月经快来和怀孕的区别:英文翻译(我全部的积分都给~)

来源:百度文库 编辑:高校问答 时间:2024/03/28 17:47:54
注意事项
1.安装前应彻底清除管道内焊渣,异物.
2.安装高度不允许超过吸上真空高度.
3.首次启动前应从泵上螺孔注入润滑液体,保证各摩擦付有足够的润滑液.

GUIDELINES
1.Weld slags and foreign matters in the tubes must be removed completely before installation.
2.Installation height should not exceed suction vacuum lift.
3.Before first use ,infuse liquid lubricants through the screw on the pump to ensure that the friction couples are lubricated sufficiently.
查找了相关专业资料,比那些软件拼凑起来的好一点点~

Guidelines
1. Installation should be complete by the former tubes welded scrap, foreign matter.
2. Installation does not allow more than smoking, high vacuum height.
3. Should start before the first infusion pump, motor lubricant liquid, the friction to ensure sufficient liquid lubricant.

Guidelines
1. Installation should be complete by the former tubes welded scrap, foreign matter.
2. Installation does not allow more than smoking, high vacuum height.
3. Should start before the first infusion pump, motor lubricant liquid, the friction to ensure sufficient liquid lubricant.

可以到google的语言工具里翻译,但翻译的效果就不要指望了。

Guidelines 1. Installation should be complete by the former tubes welded scrap, foreign matter. 2. Installation does not allow more than smoking, high vacuum height. 3. Should start before the first infusion pump, motor lubricant liquid, the friction to ensure sufficient liquid lubricant