高校问答商丘虞城县房价:急！大家帮看看这段英文什么意识？感谢
来源：百度文库 编辑：高校问答 时间：2024/05/05 07:53:07
If a 10.24 V range is desired (nominal 2.5 mV/bit), the gain trimmer (R2) should be replaced by a 50resistor, and a 200trimmer inserted in series with the analog input to Pin 13 for a full-scale range of 20.48 V (5 mV/bit), use a 500trimmer into Pin 14. The gain trim described below is now done with these trimmers. The nominal input impedance into Pin 13 is 5 k, and 10 kinto Pin 14.
如果10.24V距离理想(名义上2.5MV/点),获得裁纸机(Tai)应改为50resistor、200裁纸机等系列的模拟投入寄13全面系列20.48V(5MV/点),以500trimmer成针14. 以下是目前获得的减做这些trimmers. 输入阻抗为名义寄513K、14和10针Kinto