我们住在一起书包网:请高手给翻译一下.

Symptom(s):

Error: "hkcmd.exe - Entry Point Not Found"
Error: "IsDisplayValid could not be located in the dynamic link library hccutils.dll"
System boots into VGA mode after installing the graphics driver.
System gets a blue screen error or reboots when accessing Display Properties.
System gets a blue screen error or reboots when right clicking on the desktop.
System gets a blue screen error or reboots when clicking on the Intel® icon in the system tray.

Solution:
Download and install version 6.5.2 or later of the graphics drivers (EXE format). Alternatively, download the graphics drivers in ZIP format, extract the ZIP file, then run the following command line:
setup -16x800x600x60

After installing the updated drivers, you may need to switch PCAnywhere* into compatibility mode and back into accelerated mode by doing the following:
1) Start the system in Safe Mode by pressing F8 during bootup.
2) Run PCAnywhere.
3) From the "Tools" menu, choose "Application Options"
4) Go to the "Host Operation" tab
5) From the "Video mode selection" drop-down list, choose "Compatibility".
6) Reboot the system.
7) Switch back to accelerated mode.

This applies to: Intel® 82810 Graphics Controller
Intel® 82815 Graphics Controller

End of Interactive Support Announcement
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.
THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.For information on currently available Intel products, please see www.intel.com and/or developer.intel.com

Solution ID: CS-004230 (9.0.1020104.3226954)
Date Created: 30-Dec-2002
Last Modified: 04-Aug-2005
解释的简单易懂些,多谢!!!