沙井新桥申通快递电话:急件翻译,急,急,急。跪谢译者!

来源:百度文库 编辑:高校问答 时间:2024/04/30 02:05:09
The objective of this work was to study the effects that the utilization of different shielding gases (CO2 and a 80% Ar/20% CO2 mixture),arc energy and number of passes per layer (two and three)have on the all-weld-metaal microstructure and mechanical properties from an ANSI/AWS A5.29-98 E91T5-K2/E101T5-K3 metal cored wire,1.2mm diameter.

该工作的目的是研究不同的屏蔽气体(二氧化碳,80%氩气20%二氧化碳的混合气体)、电弧能量以及每层屏障数(两及三层)对ANSI/AWS A5.29-98 E91T5-K2/E101T5-K3, 1.2mm直径金属线全焊接金属的微结构以及机械性能的影响。
The objective of this work was to study the effects
that the utilization of different shielding gases (CO2 and a 80% Ar/20% CO2 mixture),
arc energy
and number of passes per layer (two and three) have on the all-weld-metaal microstructure and mechanical properties from an ANSI/AWS A5.29-98 E91T5-K2/E101T5-K3 metal cored wire,1.2mm diameter.

the effects A B C have on xxx

some_thing 的稍加修改。

number of pass(es) per layer :技术上不是很明白, 但是从字面是, 每层屏障/?数目

该工作的目的是研究不同的保护气体(二氧化碳,80%氩气20%二氧化碳的混合气体)、电弧能量以及考虑通过每一层的衰减(两到三层)对全焊接金属的微结构以及机械性能的影响。使用ANSI/AWS A5.29-98 E91T5-K2/E101T5-K3金属线,1.2mm直径

支持“some_thing - 首席运营官 十二级 ”

这一个工作的目的将学习效果不同屏隔瓦斯 (CO2 和 80% Ar/20% CO2 混合) 的利用,弧能源和每层 (二和三) 途径的数字有在来自 ANSI/AW a5 的所有-焊接处-metaal 的微细构造和机械的财产上。29-98 E91 T5-K2/E101 T5-K3 的金属核心了电线, 1.2 毫米直径。

目的是这项工作的影响进行研究,利用不同的屏蔽气体(二氧化碳、80%ar/20成二氧化碳混合物)、弧能源和数量证,每一层(二、三)对全Weld-Metaal微观结构和物理特性从学会/揭晓A5.2998e91t5-k2/e101t5-k3金属钻机电,1.2毫米直径.