骨折的特有体征:求助,,急用啊!!!

Using the inching pedals installed in front of each drawing block, make capstan No.1 rotate||使用慢慢前进踏板在每个图画区段之前安装了, 制造绞盘号码1 替换. Once capstan no.1 is thread-up with wire, proceed forward to the capstan no||一经绞盘号码1 是线-向上以电线, 向前地对绞盘着手进行没有.2.
To ensure that the capstan no.1 is synchronized, close the protection door of the drawing block no||确定绞盘号码1 被同步化, 关上图画的保护门阻塞没有.1.
To proceed to thread-up of capstan no.3, the rpotection door of the drawing block no.2 must be closed||着手进行穿线于-增加绞盘 3 号, 画图纸册的 rpotection 门号码2 一定被关闭.

This type of synchronization has been programmed in such way to ensure that after a head-to -head welding due to a wire break the loosen wire is recovered||这类型的同步已经在如此的方法被规划确定在一个头之后-到 -头焊接由于电线打破那放松电线被找回.
If the wire is loosen between the drawing capstans no.3 and no.4, it is enough to open the safety door of drawing block no.3 to stop the drawing blocks no.2 while inching the drawing block no||如果电线是在图画绞盘号码之间放松3 和 4 号, 打开画图纸册号码的安全门是充足的3 停止画图纸册号码2 当慢慢前进图画没有阻塞的时候.4.

After the operator has made the point to the wire using the pliers, proceed to the string-up of the drawing capstan, giving four complete laps of wire of||在操作员已经作点给使用钳子的电线之后, 前进到线-增加图画绞盘, 给四个完全电线的膝盖 360.

Now proceed with the string-up of the drawing blocks and of the spooler||现在继续线-向上图画阻塞和那缠绕在线桥上.