英式红茶的泡法:关于中文翻译成英文啊,急~~~

来源:百度文库 编辑:高校问答 时间:2024/04/27 19:12:37
各位高手帮帮忙啊,谢谢
A.抗化性测试
1)溶液:0.1%氢氧化钠、0.1%硫酸、20%洗洁精、60%酒精;
2)测试时间:10h,
3)测试完毕后,样品应无脱皮、起泡、破裂、脱色或变色;
4)测试后,样品无脱皮、起泡、破裂、脱色或变色,通过测试。
5)测试后,样品出现脱皮、起泡、破裂、脱色或变色,不通过测试。
B.附着力测试
1)用刀片割出方格;
2)用3M胶纸粘被割处;
3)测试完毕后,样品应无脱落;
4)测试后,样品无脱落,通过测试。
5)测试后,样品有脱落,不通过测试。
C.表面硬度测试
1)用HB铅笔划30来回;
2)测试完毕后,样品应无刮花;
3)测试后,样品无刮花,通过测试。
4)测试后,样品有刮花,不通过测试。

A.The anti- turns a sex test
1)aqua:0.1% hydrogens oxidize a sodium, 0.1% sulfuric acid, 20% liquefied detergents, 60% alcohols;
2)test time:10 hs,
3)after test complete, the sample should don't shed skin, don't rise a bubble and break, take off a color or change countenance;
4)after the test, the sample doesn't shed skin, doesn't rise a bubble and break, takes off a color or changes countenance, passing a test.
5)after the test, the sample appears to shed skin, rise a bubble and break, takes off a color or changes countenance, the impassability leads a test.
B.Adhesive strength test
1)mow a square space with the razor blade;
2)glue to be mown place with the 3 M gum paper;
3)after test complete, the sample should don't shed off;
4)after the test, the sample didn't shed off, passing a test.
5)after the test, the sample has been already shed off, the impassability leads a test.
C.The surface degree of hardness tests
1)row 30 returns with the HB pencil;
2)after test complete, the sample should don't pare off a flower;
3)after the test, the sample didn't pare off a flower, passing a test.
4)after the test, the sample has been already pared off a flower, the impassability leads a test.

A. - Sexual test 1) The solution : 0.1% sodium hydroxide, 0.1% acid, 20% of detergents, 60% alcohol; 2) the test of time : 10h, 3) After testing, samples should be no blistering, bubble, broken, detreated or discoloration; 4) testing, samples without appearing, bubble, broken, or discoloration detreated through testing. 5) test, a sample occurs, the bubble, broken, or detreated color, do not pass the test. B. Fuzheli test 1) using razor blades cutting out box; 2) using 3M adhesive tape Nien was cut; 3) After testing, samples should have no teeth; 4) testing, samples without particles through tests. 5) testing, samples are separated and not pass the test. C. Surface hardness test 1) Using 30 HB pencils are available; 2) After testing, samples should be no minimum; 3) testing, samples without maintenance, through testing. 4) testing, samples are tough, do not pass the test.