上海近期微商大会:电脑重装系统装不上!

来源:百度文库 编辑:高校问答 时间:2024/04/27 23:29:17
由于我电脑丢失东西,导致windows打不开,进不去,所以重装系统,按步骤进行,到了格C盘时,突然不动了,然后出现了一堆英文:
A problem has been detected and windows has been shut down to prevent damage to yourcomputer.
The problem seems to be caused by the following file:partmgr.sys
DAGE-FAULT-IN-NONPAGED-AREA
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow thes steps:
cheek to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Pisable BIOS memory options such as caching or shadowing your computer, press F8 to select Advanced Startup Options, and then select saft mode.
Technical information:
*** STOP:0x00000050 (0xFC74E4AB,0x00000000, 0xFC74E4AB,0x00000000)
*** partmgr.sys - Address FC74E4AB base at FC74C000, PateStamp 00000000
我的windows进不去,坏了,丢失了东西.而且我就是在删除C盘时,删除不掉,所以就出了这样的毛病!
而且我第二次进去时,连重装系统的提示都没有出来,就直接出来了这么多的英文
怎么办呀

进入fdisk以后 删除分区以后再格式化
如果还是不行得 话,就找一个专用得盘去format

格式化c盘然后重装操作系统 吧如果不行的话就有可能是
你的硬件有问题了 有可能是内存条的毛病

先删除C盘,再用PQ等一些软件格式化分区,最后重装系统。

进入fdisk以后 删除分区以后再格式化 然后重装系统

先在DOS里格式化磁盘,然后再安装

重新分区,在格式化