高校问答河南南阳艾叶批发市场:汉译英 谢谢你！！（人工翻译）（14）
来源：百度文库 编辑：高校问答 时间：2024/04/29 20:31:50
Viewing the Serial Number
You may view the board s serial number, hardware revision and model number using the following procedure:
1. Switch the power off and back on.
2. Press the STOP button repeatedly until you see the serial number displayed.
3. Press the STOP button again to return to exit the configuration mode and display the initial bootstrap loader message.
Expansion Board Connector
The expansion board attaches to the main board via two connectors, the Expansion Board Connector, shown in Figure 12 and the LCD connector. When the expansion board is installed, the LCD module attaches to the LCD connector on the expansion board.
See the Installing and Removing the Expansion Board section for information on installing and removing the expansion board.
You may view the board s serial number, hardware revision and model number using the following procedure:
1. Switch the power off and back on.
2. Press the STOP button repeatedly until you see the serial number displayed.
3. Press the STOP button again to return to exit the configuration mode and display the initial bootstrap loader message.
Expansion Board Connector
The expansion board attaches to the main board via two connectors, the Expansion Board Connector, shown in Figure 12 and the LCD connector. When the expansion board is installed, the LCD module attaches to the LCD connector on the expansion board.
See the Installing and Removing the Expansion Board section for information on installing and removing the expansion board.
查看序列号
你通过以下方式查看主板的序列号,硬件的修正,以及型号编号:
1,关掉电源并从新打开
2,反复按STOP键直到你看见序列号显示出来
3,再次按STOP键去退出设置模式,并显示开机的bootstrap loader信息
扩展板接口
扩展板通过两个插口连接到你的主板上,如图12所示的扩展板插口和显示器插口.当扩展板安装之后,显示器模块可以连接显示器插口到扩展板上.
请查看(说明书中)"安装与卸载扩展板"部分,以寻找相关信息.
看序号
你可能使用下列的程序看董事会 s 序号、硬件校订和样板的数字:
1. 走开和向后地转变力量在。之上
2. 重复地按停止按钮，直到你见到序号被显示。
3. 再一次按停止按钮归还退出结构模态而且显示开始的拔靴带装货机信息。
扩充卡联编者
扩充卡经由二个联编者对主要的董事会附上, 在图 12 和 LCD 联编者被显示的扩充卡联编者。 当扩充卡被安装的时候， LCD 组件在扩充卡上对 LCD 联编者附上。
见到那个安装而且为安装而且除去扩充卡的关于的资讯除去扩充卡区段。